What are the functions of adding a melt pump to a PE extrusion line?
The continuous discharge of PE extrusion line does not mean that the material entering the die is always stable. Under the condition of matching working conditions, the melt pump mainly undertakes the tasks of stabilizing flow, boosting pressure, and metering transportation.

1. Stable feeding
When the inlet is fully filled and the material state and pressure difference are similar, there is a clear correspondence between the conveying volume and the pump speed, which helps to reduce some upstream output fluctuations. However, stable pump speed does not necessarily mean constant outlet pressure. Changes in viscosity, die resistance, and other factors can still affect pressure.
2. Share the construction pressure load
The melt pump can undertake some of the post stage pressurization tasks, matching the screw plasticizing feed with the post stage pressure building separately. The pump is installed before or after the filtration unit and bears different resistance, so it is necessary to separately verify the inlet conditions and pressure difference.

3. Provide conditions for size control
When the unstable output of the current segment is the main reason, more stable metering and conveying can help improve the control conditions of film, sheet thickness, and pipe wall thickness. The final size is still affected by mold allocation, temperature, cooling, and traction status.
Adding pumps may also create conditions for increasing production and optimizing operation, but the prerequisite is that plasticizing, filtering, and downstream equipment can handle it. Insufficient feeding or plasticization at the inlet cannot be compensated by increasing the pump speed; Whether it is energy-saving should be judged based on the unit energy consumption of the qualified output of the entire line, taking into account the electricity consumption of the newly added pump drive.

Before selecting, the transformation objectives should be clearly defined, and the material, production capacity, temperature, pressure requirements, and installation conditions should be provided to ensure that the equipment configuration corresponds to specific working conditions.
Email: sale@meltpump.com
WhatsApp: +86 158 3833 1071