batte Madden chemical pump
The Madden diaphragm type chemical dosing pumps are positive displacement chemical pumps that allow the operator to adjust the displacement of the pump which changes the output rate. Madden pumps are “lost motion” type pumps which use a piston to mechanically move a rubber diaphragm that is the barrier separating the liquid from the inner workings of the pump. An electric motor drives a worm gear speed reducer that in turn turns a shaft with an eccentric installed on the shaft. As the eccentric moves forward the piston is pushed forward, along with the diaphragm, and the liquid that is in the wetted end of the pump is pushed out through the discharge check valve and into the piping going to the industrial process. As the eccentric continues to rotate through a 360-degree cycle it will eventually push the piston rod rearward, which pulls the diaphragm rearward. That rearward action creates a vacuum in the wetted end of the pump resulting in the chemical liquid being sucked into the wetted end through the suction side check valve.
Batte Machinery Zhengzhou Co.,Ltd. is a family business company, which have two factories, one chemical machinery and equipment manufacture factory, the other is chemical product factory. we are good at design dosing equipment and liquid transfer pump and electrolytic device. we are good at manufacture dosing pump, chemical pump, high pressure pump, teflon pump, centrifugal pump and so on
Whatsapp: +86 158 38331071