How much output can a rubber and plastic extruder plus a chemical melt pump increase?
The main functions of the extruder plus the melt pump are: the function of voltage stabilization and boosting and the improvement of product quality. For the extruder plus the melt pump, it can provide output, mainly for the extruder with a long service life. The long service life will cause great wear between the screw and the barrel, resulting in an excessively large gap. The amount of melt returned will increase accordingly, and the output will be reduced due to this effect. After adding the chemical melt pump, the extruder return flow and energy consumption will be reduced, which means that the extruder production volume per unit time can be maximized.
After the batte hot melt pump is installed, the maximum pressure fluctuation of the extruder is after the pump, which can reduce the pressure inside the extruder, reduce the shear strength of the melt, the temperature curve is flat, and the temperature rise is reduced. After adding a melt pump extrusion, the return flow and energy consumption are reduced, which means that the output of the extruder per unit time can be maximized. Combining the co-rotating twin-screw extruder and the melt pump into a mixing extrusion granulation production line, the mixing quality and output are greatly improved compared with the single twin-screw granulation unit. The energy consumption per kilogram of material processed can generally be reduced by about 25%. firstname.lastname@example.org